Nutrients

Are FloraFlex Nutrients Organic?
FloraFlex nutrients are synthetic.
Why is a pH recommendation on the Full Tilt feeding schedule?
This is for the Foliar Veg or Bloom.
If I want to add Power Si and/or CalMag to the Full Tilt Schedule, what order should I add them?
1. Power si 2. Cal/mag 3. V1 or B1 4. V2 or B2 5. Bulky B or Full Tilt (when applicable)
I ordered the FloraFlex Nutrient Kit, do I need to feed every watering, every other watering, or once a week with the nutrient water solution?
Feed every watering in DWC, rockwool or coco. In soil it depends on what elements are already in the blend.
How long do FloraFlex Nutrients stay good in a reservoir?
Most change the reservoir once a week when only using our nutrients, but it could last up to 6 months with agitation to prevent the water from becoming stagnant. 7 days max once incorporating any other additive.
Do I need to agitate or mix the nutrients in the reservoir?
You do not need constant agitation, just a few minutes every 30-60 minutes and/or before irrigation events are best practices.
Can I add more nutrients to my already mixed solution or reservoir?
Yes, just make sure you are adding the parts in the same ratio and are achieving your EC.
Can I add other nutrients or additives in with FloraFlex Nutrients?
Yes, you would need to monitor the EC levels and make sure the additional nutrients are mixed in after completely dissolving the Floraflex Nutrients.
Can I grow from start to finish using only FloraFlex Bloom Nutrients?
Yes. See our Super Simple Feeding Schedule. linkto it
Can I use the veg nutrients in the bloom stage to tide me over till I get more nutrients?
We do not recommend it, but if you need to get by for a few days use V1:V2 at a 0.5:1 ratio.
Why have my FloraFlex Nutrients changed color?
If it is still in the bag or a container and has changed colors it is from humidity getting into the bags. It can still be used, we recommend a dry cool environment and of course sealing them so no air gets in.
Do your nutrients have microbial properties?
No, you do not need anything other than the No Cal Mag Full Tilt Schedule.
Can I switch to FloraFlex Nutrients mid cycle?
We do not recommend changing nutrients after week 3 of bloom.
Do you recommend recirculating or drain to waste with your nutrients?
We never recommend a recirculation setup. Drain to waste is pretty standard in Big Ag and commercial grows. Below are a few reasons that make drain to waste the optimal option. 1. pH doesn’t fluctuate as much. 2. Ability to feed a fresh nutrient solution each watering. 3. Less chance of developing root rot. 4. System itself stays cleaner. 5. You are able to flush properly. 6. Better control over what is being fed to your plants. Depending on your growing medium you should only have 2-10% runoff per plant, if that. See our Crop Steering Guides in our How To Grow section of the website.
What is the mixing order when using a Silica with FloraFlex Nutrients.
Silicate is added first, allow it to sit in the reservoir for 5 minutes before adding anything else. Lastly you would mix in the FloraFlex Nutrients in order of our Full Tilt Schedule..
Can I use Power Si at their recommended dosage along with the Full Tilt Schedule.
Do I start the week 3 nutrients at day 15 or day 21?
Day 15.
Can your nutrients be used in soil?
Many in soil typically start at a lower strength feed (50-80%), depending on what elements are already in your soil, then decrease or increase as needed based on plant response.
Is it okay to feed at the recommended EC if I only feed once a day?
Gauge plant responses, ensure 20-25% runoff and keep an eye on the runoff ph, since you will have less control over drybacks when hand watering. Raise the EC if the runoff pH is drifting more than .5 upwards or you notice deficiencies/light green growth. Decrease EC if the pH runoff is dropping more than .5 of the input and/or you see tip burn.
What happens if my EC is not exact to the Full Tilt Schedule after inputting the exact weight?
You may need slightly more or less depending on your starting water.
Please, mind that only logged in users can submit questions