Matrix Irrigation System

Do I need to use the FloraFlex pots alongside FloraFlex drip lines/irrigation or can I use any pot?

The Matrix setup is an easier transition to automated watering for those who hand water while the Micro Drippers require a more precise way of watering through increased waterings and less volumes per feeding. See Crop Steering Guides for all FloraFlex pot sizes.

Varies with setup, but the common items would be: ● Reservoir ● Timer or Irrigation controller (If using Nylon Valves or Solenoids) ● Pump ● Grow tray if not using PotPro Platforms. ● Pvc Pipe and Pvc fittings will vary with setup. See How To Grow section of the website for different/relevant infographics.

The 2.25” Matrix Circulator and any round pot with an inner diameter greater than 9”.

Place the filter on the outlet of the Nylon Valve.

The 2.25” Matrix Circulator and the 3 gallon PotPro.

Optimal psi with all of our systems is between 25-35psi.

The 3” Matrix Circulator and the 5 gallon PotPro.

This will vary with different systems, we recommend placing the drip lines/stakes that would go to one of the plants into a measuring cup, and see how long it takes to achieve your desired volume per feed or irrigation event. At this point you can set your irrigation strategy, please see Crop Steering under the How To Grow section of the website for more insight.

The 3” Matrix Circulator and any round pot with an inner diameter of greater than 14.5”.

1. Micro dripper systems are geared towards low volume, high frequency irrigation strategies. We do not recommend running organics or thicker nutrients through this system. 2. Open flow systems are geared towards those wanting to simulate hand watering without hand watering. Higher volume, lower frequency irrigation strategies. Organics and/or thicker nutrients can be used with this setup.

The 3” Matrix Circulator and any round pot with an inner diameter of greater than 18”.

Yes, installing a pressure gauge at the end of your zone can ensure that the system is running efficiently and within PSI ratings.

Always use the Open Flow QDPS with the Matrix System to ensure you are able to fill the matrix to the outer rim.

Yes, you can use any medium or substrate.

Yes, when using any pot it is recommended to choose a Matrix size that can fit completely inside the pot or within the inner diameter of that pot. Example; If your pot is 11” inner diameter, you will use the 9”-10.5” Matrix.

● Open Flow Quick Disconnect Pipe System (Bubbler) ● ¼” Flora tubing (even lengths throughout the system) ● Matrix ● Matrix Pad (optional) ● Matrix Circulator ● ¼” Barbed T if using the 2.25” Matrix Circulator (can be used without Barbed T, meaning you can run 4 Matrix units per Bubbler)

The Matrix Pad is a capillary mat that serves as a wicking pad which helps to disperse water and nutrients throughout the top of the pot's medium and gives a more even feed. It also serves as another barrier against bugs coming in and out of the top of your medium or pot.

Though many love them, they are not. The Matrix Pad is a capillary mat that serves as a wicking pad which helps to disperse water and nutrients throughout the top of the pot's medium and gives a more even feed. It also serves as another barrier against bugs or pests coming in and out of the top of your medium or pot.

They can be washed and reused, avoid high heat if drying.