ClickCease

Basket Dripper Irrigation System

Do I need to use the FloraFlex pots alongside FloraFlex drip lines/irrigation or can I use any pot?
Do I need to use the FloraFlex pots alongside FloraFlex drip lines/irrigation or can I use any pot?
What other components would I need to set up any irrigation system that you sell?
Varies with setup, but the common items would be: ● Reservoir ● Timer or Irrigation controller (If using Nylon Valves or Solenoids) ● Pump ● Grow tray if not using PotPro Platforms. ● Pvc Pipe and Pvc fittings will vary with setup. See How To Grow section of the website for different/relevant infographics.
Should I put my filter before or after the Nylon Valve?
Place the filter on the outlet of the Nylon Valve.
Place the filter on the outlet of the Nylon Valve.
Optimal psi with all of our systems is between 25-35psi.
How long do I run my FloraFlex irrigation system for?
This will vary with different systems, we recommend placing the drip lines/stakes that would go to one of the plants into a measuring cup, and see how long it takes to achieve your desired volume per feed or irrigation event. At this point you can set your irrigation strategy, please see Crop Steering under the How To Grow section of the website for more insight.
What are the differences between the Micro Drip instead of the Bubbler system?
1. Micro dripper systems are geared towards low volume, high frequency irrigation strategies. We do not recommend running organics or thicker nutrients through this system. 2. Open flow systems are geared towards those wanting to simulate hand watering without hand watering. Higher volume, lower frequency irrigation strategies. Organics and/or thicker nutrients can be used with this setup.
Should I install a pressure gauge in my irrigation system?
Yes, installing a pressure gauge at the end of your zone can ensure that the system is running efficiently and within PSI ratings.
Please, mind that only logged in users can submit questions