3 lb per gallon stock tanks.
V1, V2, B1, and B2 each dissolve up to 3 lb per gallon at room temperature. Full Tilt™ goes to 2 lb/gal; Bulky B™ to 1.5 lb/gal. Headroom for injectors and large reservoirs.
Six SKUs. One straightforward feed schedule. V1 and V2 carry vegetative growth. B1 and B2 carry bloom. Bulky B™ stacks early-to-mid flower. Full Tilt™ finishes the cycle. Every product is water-soluble, fertigation-ready, and built for commercial scale.
FloraFlex® Nutrients is a six-SKU, water-soluble powder fertilizer program built for commercial cultivation: V1 and V2 cover the vegetative stage, B1 and B2 cover bloom, Bulky B™ is an early-to-mid flower stimulator, and Full Tilt™ is the late-bloom ripener for the final weeks before flush.
Every FloraFlex Nutrient SKU plays a defined role in a defined window. Here is how the eight-week cycle reads end-to-end, based on the published Full Tilt schedule.
Week ranges and per-gallon doses are summarized from the published FloraFlex Full Tilt feeding schedule. Always follow plant response and adjust to your target EC.
FloraFlex Nutrients is intentionally narrow: two parts in veg, two parts in bloom, and two stage-specific boosters. Every SKU ships as a dry powder, dissolves at concentrated rates, and slots cleanly into a Doser or fertigation skid.
V1, V2, B1, and B2 each dissolve up to 3 lb per gallon at room temperature. Full Tilt™ goes to 2 lb/gal; Bulky B™ to 1.5 lb/gal. Headroom for injectors and large reservoirs.
Instead of a 4–8 bottle program, the base runs on two parts in veg and two parts in bloom. Fewer pallet positions for resellers, simpler training for new room staff.
Powder concentrates ship pounds of fertilizer in the space and weight of bottled equivalents. Stores at room temperature. Doesn't freeze in cold trucks the way bottled liquids can.
Run the standard Full Tilt schedule with preferred Cal/Mag, the No Cal/Mag Full Tilt schedule, or the Super Simple B1/B2-only schedule — the same SKU set flexes to your water source.
The full FloraFlex Nutrient lineup, mapped to the grow cycle. Filter by stage, or compare every product side-by-side below.
Best for: the nitrogen-led half of the veg base. Mixed 1:1 with V2 across the entire vegetative period.
View V1 Vegetative Part 1
Best for: the phosphorus and potassium half of the veg base. Carries magnesium and sulfur into vegetative growth.
View V2 Vegetative Part 2
Best for: the nitrogen and potassium half of the bloom base. Runs from week 1 of flower through the final B1+B2 week.
View B1 Bloom Part 1
Best for: the phosphorus and potassium half of the bloom base. Mixed 1:1 with B1 across bloom.
View B2 Bloom Part 2
Best for: stacking onto the B1/B2 base in early-to-mid flower. FloraFlex describes Bulky B as engineered to support flowering site development.
View Bulky B Bloom Stimulator
Best for: the ripening window when plants are loading the most weight. Single-bag finishing feed used in the last 1–2 weeks before the week-8 flush.
View Full Tilt Late Bloom RipenerEvery product side-by-side: NPK on the label, where it sits in the cycle, and which workflow it fits.
| Product | Stage | Role in the program | NPK (label) | Solubility (max) | Best for |
|---|---|---|---|---|---|
| V1™ | Vegetative | Nitrogen-led Part 1 of the veg base | 14 – 0 – 4 | 3 lb/gal | Pairs 1:1 with V2 for the entire veg period |
| V2™ | Vegetative | P/K-led Part 2 of the veg base | 6 – 17 – 25 | 3 lb/gal | Pairs 1:1 with V1; carries Mg + S |
| B1™ | Bloom | N/K-led Part 1 of the bloom base | 14 – 0 – 22 | 3 lb/gal | Week 1 of flower through the final B1+B2 week |
| B2™ | Bloom | P/K-led Part 2 of the bloom base | 0 – 28 – 18 | 3 lb/gal | Pairs 1:1 with B1 across bloom |
| Bulky B™ | Stimulator | PK boost stacked onto B1+B2 early-to-mid flower | 0 – 14 – 38 | 1.5 lb/gal | Weeks 2–5 of flower depending on schedule |
| Full Tilt™ | Ripener | Single-bag late-bloom finisher | 0 – 47 – 35 | 2 lb/gal | Last 1–2 weeks before the week-8 flush |
Match the program to your water and your operation. Each schedule uses the same SKUs in a different sequence — switch between them below.
The standard FloraFlex schedule. Start each feed with a low EC contribution of your preferred Cal/Mag, then mix V1+V2 in veg or B1+B2 in bloom. Bulky B is omitted in this schedule in favor of Full Tilt taking over for the late ripen window.
| Week | Cal/Mag start EC | V1 / B1 (g/gal) | V2 / B2 (g/gal) | Full Tilt (g/gal) | Target EC |
|---|---|---|---|---|---|
| Veg · Wk 1 | 0.3 | 2 | 2 | 0 | 1.6 |
| Veg · Wk 2 | 0.3 | 2 | 2 | 0 | 1.6 |
| Veg · Wk 3 | 0.3 | 2.5 | 2.5 | 0 | 1.9 |
| Veg · Wk 4 | 0.3 | 3 | 3 | 0 | 2.2 |
| Bloom · Wk 1 | 0.3 | 3 | 3 | 0 | 2.1 |
| Bloom · Wk 2 | 0.3 | 3 | 3 | 0 | 2.1 |
| Bloom · Wk 3 | 0.3 | 3 | 3 | 0 | 2.1 |
| Bloom · Wk 4 | 0.3 | 3 | 4 | 0 | 2.4 |
| Bloom · Wk 5 | 0.2 | 3 | 2 | 3 | 2.5 |
| Bloom · Wk 6 | 0 | 2 | 2 | 4 | 2.5 |
| Bloom · Wk 7 | 0 | 0 | 0 | 8 | 1.6 |
| Bloom · Wk 8 | 0 | Flush — clean pH-adjusted water only | — | ||
All gram values are per gallon. Start EC values are with your preferred Cal/Mag. Adjust ratios if you are not reaching the target EC. Always follow plant response and reduce by 0.3 g/gal per input for 2–3 days if you see tip burn. Optimal rates depend on plant variety, growing system, and environment.
For growers whose raw water and base parts already supply enough calcium and magnesium. Higher base concentrations and a slightly different bloom sequence — Bulky B layers onto B1+B2 from week 2 of flower through week 5 before Full Tilt takes over for the ripen window.
| Week | Veg foliar (g/gal) | V1 / B1 (g/gal) | V2 / B2 (g/gal) | Bulky B (g/gal) | Full Tilt (g/gal) | Target EC |
|---|---|---|---|---|---|---|
| Veg · Wk 1 | 4 | 4 | 4 | — | — | 2.4 |
| Veg · Wk 2 | 4 | 4.5 | 4.5 | — | — | 2.7 |
| Veg · Wk 3 | 4 | 5 | 5 | — | — | 3.0 |
| Veg · Wk 4 | 4 | 5 | 5 | — | — | 3.0 |
| Bloom · Wk 1 | 4 | 5 | 5 | 0 | 0 | 3.0 |
| Bloom · Wk 2 | 4 | 4.5 | 4.5 | 1 | 0 | 3.0 |
| Bloom · Wk 3 | 4 | 4 | 4 | 2 | 0 | 3.0 |
| Bloom · Wk 4 | 0 | 4 | 3 | 3 | 0 | 3.1 |
| Bloom · Wk 5 | 0 | 3 | 3 | 5 | 0 | 3.3 |
| Bloom · Wk 6 | 0 | 2 | 2 | 0 | 8 | 2.8 |
| Bloom · Wk 7 | 0 | 0 | 0 | 0 | 8 | 1.6 |
| Bloom · Wk 8 | Flush — clean pH-adjusted water only | — | ||||
All gram values are per gallon. Confirm your raw water and base parts supply adequate Ca/Mg before running this schedule. Bloom foliar values follow the published No Cal/Mag chart. Extend Week 4 of veg for longer veg times.
The lowest-complexity way to run the FloraFlex program. B1 and B2 only, mixed at 5 g per gallon each across every week of veg and bloom, with a clean-water flush on week 8. No additional Cal/Mag is called for in veg or bloom on this schedule.
| Week | B1 (g/gal) | B2 (g/gal) | Target EC |
|---|---|---|---|
| Veg · Wk 1 | 5 | 5 | 3.0 |
| Veg · Wk 2 | 5 | 5 | 3.0 |
| Veg · Wk 3 | 5 | 5 | 3.0 |
| Veg · Wk 4 | 5 | 5 | 3.0 |
| Bloom · Wk 1 | 5 | 5 | 3.0 |
| Bloom · Wk 2 | 5 | 5 | 3.0 |
| Bloom · Wk 3 | 5 | 5 | 3.0 |
| Bloom · Wk 4 | 5 | 5 | 3.0 |
| Bloom · Wk 5 | 5 | 5 | 3.0 |
| Bloom · Wk 6 | 5 | 5 | 3.0 |
| Bloom · Wk 7 | 5 | 5 | 3.0 |
| Bloom · Wk 8 | Flush — clean pH-adjusted water only | — | |
No additional Cal/Mag is needed in veg or bloom stages on this schedule. Use the FloraFlex Nutrient Calculator to convert per-gallon dosing into stock-tank concentrations for fertigation.
FloraFlex Nutrients is one half of a system. Powder format, high-solubility batching, and the published feeding schedules are designed to run cleanly through FloraFlex Dosers and standard fertigation skids.
V1, V2, B1, and B2 dissolve up to 3 lb per gallon at room temperature. Headroom for large reservoirs and injector pods.
The FloraFlex Nutrient Calculator converts per-gallon mixing instructions into stock-tank concentrations and dilution ratios.
FloraFlex publishes Doser and fertigation feeding regimens that align with each of the three published nutrient schedules.
The veg and bloom foliar inputs in the No Cal/Mag schedule give you a foliar layer that uses the same SKUs you already inventory.
FloraFlex Nutrients ships in 1 lb, 5 lb, and pallet quantities. Resellers stock a complete commercial feed program from six SKUs instead of a fragmented multi-bottle lineup — simpler ordering, lower freight, and the same regimen that the FloraFlex Calculator already supports.
The questions commercial cultivators and resellers ask before they place an order.