When it comes to setting up an efficient irrigation system, one crucial component often overlooked is the disc filter. At FloraFlex, we prioritize not only plant health but also ease of use, and that’s why we’ve designed a versatile, easy-to-install disc filter. This guide will walk you through how to set up your FloraFlex Disc Filter on PVC with our range of pumps, ensuring optimal irrigation performance.

Materials You’ll Need

Before starting the installation, it’s important to gather all the necessary parts. Here’s a list of the essential materials:

1. PVC Male Adaptor Pipe Fittings
2. NPT Female to Female Thread Adaptor
   Optional: FloraFlex 1” Nylon Valve (used to shut off water flow for maintenance)
3. FloraFlex Disc Filter
4. 16/17mm Male Adaptor
   
   

Once you’ve gathered these components, you’re ready to begin your installation.

Step-by-Step Setup Instructions

Setting up the FloraFlex Disc Filter involves a few straightforward steps. Here’s a detailed guide, following the process as demonstrated in our instructional video.

1. Connecting from the PVC Line

• Start by dropping down from your PVC line, typically running along the roof or a higher point in your setup.
• Attach a PVC Male Adaptor Pipe Fitting to the end of your PVC line. The male adaptor is slip-fit on one side, ensuring a snug connection to the PVC, while the other side is threaded for easy attachment.

2. Attaching the NPT Female to Female Thread Adaptor

• After the male adaptor is in place, attach the NPT Female to Female Thread Adaptor. This adaptor serves as the essential link between the PVC and the disc filter.
• Optional: For more control over water flow, especially when maintenance is required, you can install a FloraFlex 1” Nylon Valve between the male adaptor and the thread adaptor. This valve allows you to easily shut off water flow when necessary.

3. Installing the Disc Filter

• Once the adaptors are in place, it’s time to attach the FloraFlex Disc Filter. Here’s where orientation is key:
• The screen arrow on the disc filter should point towards your grow table.
• The disc arrow should point toward the water source or reservoir. This ensures that the filtration works correctly, catching sediment and preventing it from clogging your irrigation system.

4. Adding Another NPT Female to Female Thread Adaptor

• After the disc filter is properly installed, attach an additional NPT Female to Female Thread Adaptor. This adaptor will provide a secure connection to the next component in the setup.

5. Connecting the Adaptor and Tubing

• After attaching the disc filter, connect it to an additional NPT Female to Female Thread Adaptor and then to the 16/17mm Male Adaptor. This adaptor will transition from the threaded filter to the flexible 16/17mm tubing.
• Finally, run the tubing down to the T-junction and onward to your table setup, completing the connection to the irrigation layout.
  
  

By following these steps, you will have a fully operational disc filter installed on your PVC line, ensuring that your FloraFlex irrigation system is protected from sediment and impurities.

Understanding the FloraFlex Disc Filter

The FloraFlex Disc Filter is a key component for any large-scale or wholesale irrigation system. Its advanced filtration design ensures that water entering your system is free from debris and sediments that could otherwise clog drippers or damage pumps. Here are some key features that make it an excellent choice for your irrigation needs:

• Durable Construction: Built from UV-resistant, high-quality plastic, this filter is designed to withstand tough outdoor conditions and long-term use.
• Three-Dimensional Filtration: The filter utilizes grooved discs to trap sediment, providing a more effective filtration process than traditional mesh filters.
• Low Maintenance: Designed for easy cleaning, the discs can be easily removed and washed when necessary.
• Chemical Resistance: The filter is highly resistant to common chemicals used in drip irrigation systems, ensuring that it maintains its performance over time.
• Large Filtration Area: With a filtration area of 28 square inches and a 120 mesh/130-micron level, the disc filter ensures efficient water filtration with minimal flow disruption.
• Optimal Flow Rate: The filter is designed for a maximum recommended flow rate of 26 gallons per minute (gpm), ideal for large irrigation zones with a lower flow rate.
• Easy Installation: The filter is equipped with 1” male pipe thread connections for straightforward attachment to your system.

Pro Tip for Installation

To avoid pressure building up within the disc filter when the system is not in use, it’s highly recommended to install the filter after a valve or shut-off point. This will allow you to control water flow and maintain the filter’s integrity over time.

Final Thoughts

Setting up a disc filter might seem complicated at first, but by following the steps outlined above, you can ensure that your FloraFlex system is well protected from debris and running efficiently. With the correct installation of the disc filter and FloraFlex pumps, you’ll enjoy lower maintenance needs and better performance over the long term.